Application:FTTx,Data Room Transformation
Technical specification
| Item | Parameter | |
| Cable Scope | 3.0 x 2.0 mm | |
| Size: | 59*8.7*8.3mm & 55*8.7*8.3mm | |
| Fiber Diameter | 125μm ( 652 & 657 ) | |
| Coating Diameter | 250μm | |
| Mode | SM | |
| Operation Time | about 15s(exclude fiber presetting) | |
| Insertion Loss | ≤ 0.5dB Max/Typically ≤0.3dB(1310nm &1550nm) | |
| Return Loss | ≥50dB for UPC, ≥55dB for APC | |
| Success Rate | >98% | |
| Reusable Times | >10 times | |
| Tighten Strength of Naked Fiber | >5 N | |
| Tensile Strength | >50 N | |
| Temperature | -40 ~ +85 C | |
| On-line Tensile Strength Test (20 N) | IL range≤0.3dB RL range≤5dB | |
| Mechanical Durability(500 times) | IL range≤0.3dB RL range≤5dB | |
| Drop Test(4m concrete floor, once each direction, three times total) |
IL range≤0.3dB RL range≤5dB | |
Relevant Solutions
- Easy operating, The connector can be directly used in ONU, also with fasten strength more than 5 kg, it is widely used in FTTH project of network
revolution. It also reduce the use of sockets and adapters, save cost of project.
-
With 86 standard socket and adapter, the connector makes connection between drop cable and patch cord. The 86 standard socket provides
complete protection with its unique design.
-
Applicable to connection with field mountable indoor cable, pigtail, patch cord and transformation of patch cord in data room and directly used in
specific ONU.
Hot Tags: field assembly connector, China field assembly connector manufacturers, suppliers, factory
