Description
This 3306-4P 4 Way MOCA Amplifier is designed to provide the ability to use MoCA technology to communicate to all the amplifier output ports from the modem port, bypassing the amplifier itself. The built-in triplex filter constrains the MoCA signals to the home network while providing the necessary MoCA bypass connection around the amplifier to enable in-home networking between eMTA, set-top boxes and other devices (for example: gaming consoles, PCs, laptops, tablets, etc.). The passive modem bypass port supports critical applications, such as telephony, requiring high reliability networks to provide uninterrupted service even in the event of power outages and / or amplifier failure.
Applications
◆ Distribution of video in the house for applications with a multi-room DVR.
◆ Home high speed networking.
◆ Allows internet service, videos and gaming to share bandwidth without losing speed and quality.
◆ High definition video streaming from the internet.
Features
◆ 4 output RF MoCA amplifier + 1 modem output active return with unity gain
◆ Auto termination upon power outage
◆ Lowest distortions performance available IEEE 6 kV, B3 surge withstand on all RF ports
◆ Sealed F ports conform to SCTE standards
◆ Integrated MoCA triplex filter: All ports “talking” – MoCA devices on the bypass port can communicate to all other output ports.
◆ Unity gain – upstream and downstream: Compensates for splitter loss.
◆ Patented DSM seizure technology: Provides increased spring retention for better surface contact.
◆ Passive bypass port: Eliminates loss of service due to power outages or amplifier failure.
Specification
|
Place of original: China |
|||
|
MODEL NO.: GDMOCA-009 (3306-4P) |
|||
|
DESCRIPTION: 4-WAY CATV DROP AMPLIFIER WITH PASSIVE RETURN |
|||
|
ITEM |
TYPICAL |
Q.C.LIMIT |
TEST CONDITIONS |
|
Forward Path |
|||
|
Freq. Range |
|
54 ~ 1218MHz |
|
|
Gain (RF in to out) |
0.5dB |
0dB min |
54 ~ 1002 MHz |
|
|
-3.0dB |
-3.8dB min |
1003 ~ 1218 MHz |
|
Voip port insertion loss |
-4.8dB |
-5.5dB max |
54 ~ 1002 MHz |
|
|
-6.9dB |
-7.5dB max |
1003 ~ 1218 MHz |
|
Return Loss (in/out) |
-16 dB |
-15dB Min. |
54 ~ 1218 MHz |
|
Noise Figure (54 ~ 1002 MHz) |
5 dB typical device NF (not including splitter circuitry) |
|
|
|
Group Delay |
|
30 ns Max. |
For 102MHz (3.58MHz Span) |
|
|
|
15 ns Max. |
For 108MHz (3.58MHz Span) |
|
|
|
5 ns Max. |
For 112MHz&up (3.58MHz Span) |
|
Out to out isolation |
-25dB |
-20dB min |
54 ~ 1218MHz |
|
RF shielding effectiveness |
|
≤-110 dB |
|
|
RF port to power port isolation |
|
100dBc |
54 ~ 1218MHz |
|
MOCA Path: |
|||
|
Freq. Range |
|
|
1275-1675MHz |
|
Insertion loss (voip to any output) |
-18 dB |
-19dBmax |
1275-1300MHz |
|
|
-15 dB |
-17dBmax |
1301-1675MHz |
|
Isolation (any output to output) |
-17dB |
-20dBmax |
1275-1675MHz |
|
Return loss (voip/any output port) |
-10 dB |
-5dB Min. |
1275-1675MHz |
|
Return Path: |
|||
|
Freq. Range |
|
5 ~ 85MHz |
|
|
Gain |
-12dB |
-13dB min |
5 ~ 85 MHz |
|
Return Loss (IN/OUT) |
-20 dB |
-18 dB Min. |
5 ~ 85 MHz |
|
Voip insertion loss |
-3.5 dB |
-3.8 dB Max. |
5 ~ 85 MHz |
|
Flatness |
±0.5 dB |
1.5dB Max. |
5 ~ 85 MHz |
|
Out to out isolation |
-25dB |
-20dB Min |
5 ~ 85MHz |
|
Group Delay |
|
20 ns Max. |
5 ~ 85 MHz Over A 1MHz Span |
|
|
|
5 ns Max. |
10 ~ 80 MHz Over A 1MHz Span |
|
Distortion: |
|||
|
Composite Second Order* |
|
-62 dBc Max. |
|
|
Composite Triple Beat* |
|
-75 dBc Max. |
|
|
Cross Modulation* |
|
-75 dBc Max. |
|
|
Hum Modulation |
|
-90dBc Max. |
|
|
REV: *79 NTSC analog+33 256/QAM digital @4dBmv/ch all/channels flat |
|||
|
Surge Withstand Capability: |
|
CAT B3, 6KV, 3KA |
Input port-IEEE C62.41-1991 |
|
|
Category B-3 Combo wave, 6kV, 3kA |
||
|
|
Output port-IEEE C62.41-1991 |
||
|
|
Category B-3 Combo wave, 6kV, 3kA |
||
|
Power Requirements: |
|||
|
Input |
|
120 VAC |
|
|
Frequency |
|
60 Hz |
|
|
Output |
|
12V DC, 400mA |
|
|
Operating Temperature: |
|
-40℃ to + 60℃ |
|
|
MECHANICAL |
|||
|
Mounting |
|
Horizontal/Vertical |
|
|
Dimensions |
|
W:179mm x D:71mm x H:43mm |
|
|
Ground Block Count |
|
1 - Bi-Directional |
|
|
Housing & Cover Material |
|
A360 Aluminum Alloy |
|
|
Finish / Plating Type |
|
Powdercoating |
|
|
Sealing |
|
Gasket 1-moisture 1 EMI/RFI |
|
|
F port Material |
|
C360 Brass |
|
|
F port Plating |
|
Nickel |
|
|
F port Spacing |
|
1.0” min. |
|
|
F port Torque |
|
60 in. lbs. min |
|
|
F port Pin Retention (RG-6 Center Pin) |
|
200 grams min. |
|
FAQ
Q: Can you produce the order with the customer's brand?
A: Yes, of course. OEM & ODM service is warmly provided.
Q: How do you control product quality?
A: Quality first. All our selected products undergo standardized testing before packaging and shipping.
Q: How do you ship the goods?
A: We usually transport by sea or air.
Q: What is your main market?
A: Europe, North America, South America, The middle east, and etc.
Q: How is the supply chain managed?
A: The incoming material process strictly follows the quality inspection engineering and supply chain management of IQC, IPQC, QC, CFQC, QA and other links.
Q: Enterprise size, number of production and R&D personnel.
A: The company was established in 1992, with over 1000 employees, over 20 research and development personnel, and a production base of 40000 square meters.
Hot Tags: 4 way moca amplifier, China 4 way moca amplifier manufacturers, suppliers, factory, moca compatible coax amplifier, moca signal booster, MOCA Amplifier, moca bypass amplifier, moca amp
