200G QSFP56 SR4 Optical Transceiver: Powering Zero-Retrofit Leaf-Spine Upgrades and AI Computing Clusters

Nov 20, 2026

Leave a message

As cloud data centers and AI training clusters upgrade server access rates from 25G to 50G/100G and adopt high-throughput GPU interconnects, traditional 100G QSFP28 links face severe bandwidth bottlenecks, while passive Direct Attach Copper (DAC) cables are restricted to 3–5 meters and impede rack airflow. The 200G QSFP56 SR4 Optical Transceiver-exemplified by the GME GMQ-5PV38C-1H-solves this challenge by delivering high-density, ultra-low-power 200Gbps short-reach optical connectivity over existing multimode fiber (MMF) infrastructure.

6

1. 4×53.125Gbps PAM4 Parallel Architecture & Signal Integrity
Compliant with IEEE 802.3cd (200GBASE-SR4), SFF-8679, and CMIS 4.0 / SFF-8636 standards, the GME GMQ-5PV38C-1H transitions from legacy NRZ modulation to 4-level Pulse Amplitude Modulation (PAM4) across four parallel lanes:

200GAUI-4 Electrical & 850nm Optical Engine: Each of the four channels operates at a signaling rate of 26.5625 GBd (±100 ppm)-equivalent to 53.125 Gbps per lane-over an 850 nm (840–860 nm) VCSEL array, achieving an aggregate 200 Gbps data rate.

Superior TX & RX Optical Budget: The transmitter delivers an average launch power of -6.5 to +4.0 dBm, Outer Optical Modulation Amplitude (OMAouterOMAouter​) of -4.5 to +3.0 dBm, Extinction Ratio (ER) ≥ 3.0 dB, and Transmitter Dispersion Eye Closure for PAM4 (TDECQ) ≤ 4.5 dB. On the receiver side, it supports an average receive power of -8.4 to +4.0 dBm, stressed receiver sensitivity of -3.4 dBm, and SECQ ≤ 4.5 dB for reliable signal recovery.

70m OM3 / 100m OM4 Reach via Single MPO-12: Utilizing a single MPO-12 receptacle (8 active fibers: 4 TX and 4 RX), the module transmits up to 70 meters on OM3 MMF and 100 meters on OM4 MMF with host Forward Error Correction (FEC) enabled.

2. Ultra-Low Power Consumption (≤ 4W) and Industrial Reliability
High-density 200G/400G switch faceplates require strict thermal budgets. Operating on a single +3.3 V (3.135 V – 3.465 V) supply, the GMQ-5PV38C-1H keeps maximum power consumption to ≤ 4 W across a 0 °C to +70 °C commercial case temperature range (-40 °C to +85 °C storage temperature, 10%–85% RH). It also incorporates robust ESD protection (1 kV on high-speed pins and 2 kV on normal electrical pins per MIL-STD-883 / JESD22-A114-A), EN 60825-1 Class 1 Laser safety, and RoHS compliance.

3. Four Core Deployment Scenarios in Modern Data Centers

1-AI Computing Clusters & HPC (InfiniBand HDR / RoCEv2): Connects GPU servers equipped with 200G network adapters (such as ConnectX-6) to 200G Top-of-Rack (ToR) switches (such as Quantum QM8700 series). Replacing bulky copper DAC cables with lightweight OM4 fiber extends cross-rack reach up to 100 m while improving rack cooling and maintaining ultra-low latency.

2-Cloud Data Center Leaf-Spine Uplinks (Zero Cabling Retrofit): Many facilities deployed 12-fiber OM3/OM4 MPO trunk cabling during the 40G/100G era. Network architects can directly swap 100G QSFP28 SR4 transceivers at both ends for 200G QSFP56 SR4 modules-doubling uplink bandwidth to 200Gbps with zero fiber re-cabling cost.

3-High-Density Breakout Topologies (1-to-4 & 1-to-2):

  • 200G to 4×50G Breakout: Pair one 200G QSFP56 SR4 in a ToR switch with an MPO-12 to 4×LC duplex breakout cable to connect four servers running 50G SFP56 SR modules.
  • 200G to 2×100G Breakout: Use a 1-to-2 MPO splitter cable to link one 200G switch port to two 100G QSFP56 SR2 (or HDR100) server ports, allowing a 40-port 200G switch to serve up to 80 × 100G nodes.

4-Native 400G/800G Downward Interoperability: Because both 400GBASE-SR8 (8×50G) and 200GBASE-SR4 (4×50G) share the same 50G PAM4 + 850nm multimode single-lane architecture, a 400G SR8 core port can split seamlessly into two 200G QSFP56 SR4 links via an MPO-16/24 to 2×MPO-12 harness without expensive gearbox chips.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!