As commercial complexes, hospitality resorts, residential towers, and cable TV headends increasingly demand ultra-high-definition satellite and terrestrial television programming, traditional coaxial distribution networks are hitting a physical wall. Over long distances, coaxial cables suffer from severe high-frequency attenuation, electromagnetic interference, and cumbersome multi-cable trunk wiring. In response to this industry-wide shift toward all-optical infrastructure, GME has officially spotlighted its GSR 6015 Satellite TV Optic Receiver (SAT-IF+TERR Multi CWDM Optical Receiver)-an industrial-grade optical-to-RF conversion platform engineered to deliver four independent polarizations and terrestrial CATV signals over a single optical fiber.
Overcoming Coaxial Bottlenecks with 1510–1570nm Consecutive CWDM Technology
In conventional satellite master antenna television (SMATV) deployments, distributing four satellite LNB polarizations-Horizontal High (HH), Vertical High (VH), Horizontal Low (HL), and Vertical Low (VL)-typically requires four separate coaxial trunks running from the dish array to intermediate distribution closets. Not only does this inflate installation labor and conduit space, but signal degradation above 950MHz often compromises picture stability at distant endpoints.
The GME GSR 6015 eliminates this bottleneck by leveraging Coarse Wavelength Division Multiplexing (CWDM) across four consecutive spectral windows: 1510nm, 1530nm, 1550nm, and 1570nm. By consolidating four multiplexed optical wavelengths into a single-core single-mode fiber via an SC/APC interface (with optical return loss ≥45 dB≥45 dB), operators can replace four heavy coaxial cable runs with one thin fiber strand. At the receiving node, the GSR 6015 demultiplexes the optical stream and outputs four fully isolated RF ports covering a continuous 47–2150MHz bandwidth-simultaneously supporting terrestrial CATV (47–860MHz) and Satellite IF (950–2150MHz) distribution.
Four-Stage Precision Conversion & Optical AGC Stability
Maintaining carrier-grade RF fidelity across wide temperature and optical link variations is a critical challenge in FTTx and Optical CATV networks. Inside its compact 143×110×28.8 mm143×110×28.8 mm industrial metal enclosure, the GSR 6015 utilizes a precisely engineered four-stage conversion architecture:
Optical Amplification & High-Linearity Photodetection: Incoming optical signals within the −18 to +3 dBm−18 to +3 dBm range are captured by high-linearity photodetectors with a responsivity of ≥0.9 A/W≥0.9 A/W, establishing a clean bridge between the optical and electrical domains.
Built-in Optical AGC (Automatic Gain Control): Fluctuations in upstream fiber link budgets can easily destabilize downstream tuners. The GSR 6015 incorporates a dedicated optical AGC window (−10 to 0 dBm−10 to 0 dBm) that locks output stability within ±1 dB±1 dB, guaranteeing consistent output levels of ≥80 dBμV≥80 dBμV for terrestrial bands and ≥78 dBμV≥78 dBμV for SAT-IF bands.
Signal Conditioning & Ultra-Low Noise GaAs Amplification: Utilizing active Gallium Arsenide (GaAs) amplifier stages and ultra-low noise filtering, the receiver achieves exceptional linearity-maintaining a Carrier-to-Noise Ratio (CNR≥50 dB), Composite Second Order (CSO≥65 dBCSO≥65 dB), Composite Triple Beat (CTB≥62 dBCTB≥62 dB), and in-band flatness within ±1.5 dB±1.5 dB.
One-Second Fault Isolation: Visual LED Diagnostics Without Field Meters
In commercial broadcast environments such as luxury hotels, stadiums, or multi-dwelling units (MDUs), the steepest operational cost is rarely hardware replacement-it is the troubleshooting downtime between signal failure and fault localization. To streamline operations and maintenance (O&M), the GME GSR 6015 features four independent front-panel optical status LEDs directly mapped to the HH, VH, HL, and VL polarization channels.
When a specific optical wavelength is active and within range, its corresponding indicator remains illuminated; if an upstream fiber break or LNB polarization drop occurs, only that channel's LED extinguishes. Field technicians can verify channel-level link health in one second without disconnecting RF ports or attaching optical power meters and spectrum analyzers.
Versatile Downstream Integration for Global System Integrators
Operating on a DC-24V power supply with low power consumption (<6W<6W) and standard 75Ω75Ω output impedance (return loss ≥12 dB≥12 dB), the GSR 6015 is built for continuous 24/7 operation in equipment racks and low-voltage distribution cabinets. It connects directly to four core downstream scenarios without intermediate converters:
Cable TV Headends: Serves as a high-density primary optical receiver feeding headend modulators and edge QAMs.
Hospitality & Hotel Room Terminals: Delivers uniform satellite and terrestrial TV signals to hundreds of guest rooms regardless of occupancy load.
Building & Campus RF Distribution Amplifiers: Interfaces seamlessly with cascade splitters and multi-switches across large residential communities.
Commercial & Consumer Set-Top Boxes: Provides plug-and-play IF/RF feeds directly to end-user receivers.
To support global B2B distributors, AV system integrators, and OEM/ODM partners, GME provides the GSR 6015 in three tailored packaging options-from standard bulk export cartons and custom-branded retail color boxes to premium magnetic flip-top gift boxes with precision foam inserts. For full technical datasheets or sample inquiries, visit the official GME Satellite TV Optic Receiver Product Page.
