Product Overview
The connector has pre-installed fiber inside the factory, and the end face is precision polished and inspected in the factory. On-site, the fiber from the user's cable is cleaved, and the signal connection is achieved through mechanical splicing with the pre-installed fiber via the built-in alignment mechanism. The product is mainly used in FTTH.
Specification
| Item | Specification | Parameter | Requirement |
| Connector Type | SC/PC | Operating Wavelength | 1310/1550nm |
| End face Angle | 0° | Insertion Loss | 0.3dB (Typical); 0.5dB (Maximum) |
| Fiber Type | Single mode | Return Loss | PC≥45dB |
| Pre-installed Fiber Type | G657 | Repeatability | 750 repetitions (IL≤0.3dB) |
| Compatible Cable Cross-section Size | 3.0*2.0mm | Tensile Strength | ≥20N (IL≤0.3dB) |
| Ferrule Diameter | 2.499±0.0005mm | Installation Time | About 2 min |
| Ferrule Concentricity | ≤1um | Re-assembly Times | |
| Plastic Parts Material | Main Part ------ Chi Mei PC 6710 | Not less than 3 times | |
| V-Groove Core Part ------ SABIC PEI | Operating Temperature | -25~65℃ | |
| 1000Dust Cap ------ Sinopec PE 2426H | Storage Temperature | -40~80℃ | |
| Conductive Blade Material | Phosphor Bronze C5191-H | Operating Humidity | ≤95% (+30℃) |
| Spring Material | SUS304 | Assembly Type | Mechanical |
| Conductive Blade Surface Treatment | Nickel Plated | Locking Mechanism | Push-Pull |
| Conductive Blade Surface Thickness | ≥ 80 μ" | Name | Parameter |
| Parameter | UPC | Max current | 1700mA |
| Radius of Curvature | 7~25 mm | Max power | 96W |
| Fiber Height | -100~+50 nm | Voltage | 48V |
| Apex Offset | ≤50 um | Withstand Voltage | DC 1000V, AC 750V, no breakdown or flash over within 1 minute |
Hot Tags: pof sc fast connector, China pof sc fast connector manufacturers, suppliers, factory
